HETROC VACUUM PUMP 10CFM HT 2RS-4

  • Take off the gas filling cap and connect the pump container. The pipe should be short and sealed to avoid any leak.
  • Take off the exhaust cap, plug in and switch on for readiness of operation and uses. Operation will produce oil smoke belongs to the normal phenomenon.
  • After using the machine, unplug it, remove the connecting pipes, and cover the exhaust cap and oil plug.
  • Examine the oil level before operation, make sure the oil level is not lower than the oil level line. Ensure to fill oil with the right level and oil specification before starting to power on (use high-speed vacuum oil specification “HFV 32”).
Category: Brand:

Description

ModelHT RS-0.5HT RS-1HT RS-1.5HT RS-2HT RS-3HT RS-4HT RS-6
Voltage110V 60Hz / 220V 50Hz110V 60Hz / 220V 50Hz110V 60Hz / 220V 50Hz110V 60Hz / 220V 50Hz110V 60Hz / 220V 50Hz110V 60Hz / 220V 50Hz110V 60Hz / 220V 50Hz
Free Air Displacement (CFM)1.8 / 1.53 / 2.54 / 3.55 / 4.57 / 6.09 / 8.012 / 10
Ultimate Vacuum (Pa)5555555
Ultimate Vacuum (mBar)0.050.050.050.050.050.050.05
Rotating Speed (RPM)1720 / 14401720 / 14401720 / 14401720 / 14401720 / 14401720 / 14401720 / 1440
Power (HP)1/41/41/31/31/23/41
Capacity (Oil) (ml)170220225250250300450
Dimension (mm)240×110×220240×110×220270×110×220290×120×230290×120×240360×120×250430×135×260
Weight (kg)5.566.57.591118

Note: Voltage and free-air displacement values are shown as 110V/60Hz followed by 220V/50Hz, matching the image.